24-hour hotline+86-0316-7210054
Your location:Home > Case > Engineering case
1600x6 slitting unit
(1-6)X1600mm slitting machine, this machine is suitable for slitting and winding steel plates of various materials. The large drum plate is unwound, the longitudinal shear is cut into a number of strips according to the required width, and then the coil is rewound and bundled into a strip coil, which is used for the next process such as cold bending stamping...
  • +86-0316-7210054
  • Online consultation
    • (1-6)X1600mm slitting machine, this machine is suitable for slitting and winding steel plates of various materials. The large drum plate is unwound, the longitudinal shear is cut into a number of strips according to the required width, and then the coil is rewound and bundled into a strip coil, which is used for the next process such as cold bending stamping and welding pipe.

      1. Raw material specifications

      Material: Suitable for hot-rolled carbon/cold-rolled/galvanized steel strip Q355B/G550

      Mechanical properties: σs≤420MPa, σb≤650Mpa

      Thickness: 1mm-6mm

      Width: 800mm - 1600mm

      Coil outer diameter: φ800mm - φ2000mm

      Coil inner diameter: Φ500m - Φ770mm

      Volume weight: ≤30t 

      2. Precision of slitting

      Width tolerance: ≤±0.15mm

      Longitudinal tolerance (side bending) : ≤0.8mm/m

      Edge burr: ≤3% plate thickness

      3. Unit data

      Shear mode: pull shear, synchronous shear

      Number of slitting strips: 1-3mm divided into 15, 5mm divided into 10; 6mm divided into 6 pieces

      Winding diameter: Φ610mm

      Winding tower type: ≤±2mm

      Slitting speed: 0-120M/min (thickness 1.0-6mm), 100M/min(thickness 1.0-6mm)

      Equipment working face elevation: 800mm

    4. Slitting unit equipment composition

    V-type pre-discharge table, hydraulic loading trolley, hydraulic discharging machine, hydraulic pressure drawing shovel head mechanism, hydraulic clamping initial straightening machine, cutting shears, transition table, hydraulic guide mechanism, sinews, hydraulic side wire machine, hydraulic storage bridge, hydraulic pre-parting press roller mechanism, hydraulic parting mechanism, hydraulic winding machine, hydraulic support base, hydraulic unloading trolley, hydraulic system, electric control system

    5. Customer on-site shooting


    HomeTelProduct
    Linkbox: Spiral welded pipe mill | H-beam steelequipment | ERW welded pipe mill |
    Copyright © Bazhou Wanxin Industrial and Trading Co.,Ltd All Rights Reserved  Website making:sanjin.net